These movies cover basic features of TouchCAD such as the palettes, menus, drawing methods, unfolding features, etc. The purpose is to provide a fairly detailed live demonstration of the features. The user's manual also covers these features, but some things are easier to understand when seen demonstrated visually.
Marine
Design 3.6 (
30 meg / 20
minutes) Overview of the marine design features found in TouchCAD 3.6.
Marine Design
Setup ( 3.4 Meg / 3.48
minutes) Illustrates how to set up TouchCAD for marine design.
Powerboat hull
( 19 Meg / 15.33 minutes)
Illustrates some useful techniques for powerboat hull design.
Reverse
engineering hull ( 19 Meg / 12.5
minutes) Illustrates some useful techniques when reverse engineering
a boat hull based on background images, imported points and 3D sections
in DXF format.
Marine design (11.0 Meg/ 16 minutes) provides an introduction to various methods
and techniques used in marine design and how to make use of the built in
marine specific calculation features. .
Clinker Built Planking
(600 K / 2 minutes) shows how to convert a rounded
hull to a clinker built planking hull such as used in older wooden boats
Lundström Design, Ekhagsvägen 7, 104 05 Stockholm,
Sweden
Phone int-46-8-15 46 63, E-mail: info@touchcad.com
IP Phone numbers: Skype: touchcad, - iChat: touchcad, - AIM: touchcad